Audiobus: Use your music apps together.

What is Audiobus? — Audiobus is an award-winning music app for iPhone and iPad which lets you use your other music apps together. Chain effects on your favourite synth, run the output of apps or Audio Units into an app like GarageBand or Loopy, or select a different audio interface output for each app. Route MIDI between apps — drive a synth from a MIDI sequencer, or add an arpeggiator to your MIDI keyboard — or sync with your external MIDI gear. And control your entire setup from a MIDI controller.

Download on the App Store

Audiobus is the app that makes the rest of your setup better.

Koala - the ultimate pocket-sized sampler

1…5253555758…84

Comments

  • ZerozerozeroZerozerozero

    Ha, crossed messages. Dread updating to any 14 version so been putting off but will try now 🤞🏻

  • wimwim

    @Zerozerozero said:
    Interesting. I’m on 14.2 ( 🤬). Maybe something in that. Will try and look at crash logs. Appreciate the investigation 🙏🏻

    There's no reason I know of not to go to iOS 14.4 if you're already on 14.2.

  • ZerozerozeroZerozerozero

    Here goes...

  • ZerozerozeroZerozerozero

    Boom. Was too scared to update because 14.2 caused untold problems and killed so many apps but Koala not crashing so far now and it’s a big app for me. Ha, simple solution! Fear got the better of me! Much appreciation (as always) to the many technical peeps on this forum. Is being able to make music on a device too important to me? Of course! 🙏🏻❤️

  • espiegel123espiegel123
    edited January 2021

    @Zerozerozero said:
    Boom. Was too scared to update because 14.2 caused untold problems and killed so many apps but Koala not crashing so far now and it’s a big app for me. Ha, simple solution! Fear got the better of me! Much appreciation (as always) to the many technical peeps on this forum. Is being able to make music on a device too important to me? Of course! 🙏🏻❤️

    iOS 14.2 had a terribly CoreMidi bug responsible for a lot of crashes.

  • auxmuxauxmux

    This new update is sweet! Makes me want this as an AU even more.

  • AudioGusAudioGus

    @espiegel123 said:

    @Zerozerozero said:
    Boom. Was too scared to update because 14.2 caused untold problems and killed so many apps but Koala not crashing so far now and it’s a big app for me. Ha, simple solution! Fear got the better of me! Much appreciation (as always) to the many technical peeps on this forum. Is being able to make music on a device too important to me? Of course! 🙏🏻❤️

    iOS 14.2 had a terribly CoreMidi bug responsible for a lot of crashes.

    Oh! Hmmm, I wonder if this had infected my BM3 midi clock syncs. Will sync and see!

  • HalftoneHalftone

    Having just picked up Koala on Monday, and the IAP today - I just gotta say wowie!! What a superb app. Fun, easy, & gets great sounding results! Lovin it so far - and I’ve only played with it for an hour or so total thanks @elf_audio

  • bcrichardsbcrichards
    edited January 2021

    I’m getting crashes on my iPad when using Stretch, but not on my iPhone. Aside from that, what an amazing update
    Edit: no more crashes since this post.

  • HalftoneHalftone

    Is there a time limit to screen recorded videos imported? I tried recording a YouTube video with screen recording that was aboit 1:07 and it compressed but didn’t import. I cut it down to 30 secs and that worked.

  • FingolfinzzFingolfinzz

    I’ve been getting a crash a couple times now after auto slicing a sample and then bouncing each individual slice. It usually happens about the fifth sample or so on an iPhone 11 running iOS 14.3

  • AileromAilerom

    Tapping the bars at the top of timestretch causes an instant Crash. iPad 7, iOS 14.3

  • SamuSamu

    @Ailerom said:
    Tapping the bars at the top of timestretch causes an instant Crash. iPad 7, iOS 14.3

    If you're already on iPadOS14.3 it doesn't 'hurt' to update to iPadOS14.4 and try.

    I can't replicate the crash on my iPhone 8 nor the iPad Air 2, both running iOS/iPadOS14.4.
    If it was iPadOS14.3 related bug the betas I tested would have crashed on me but they didn't?!

    So this could eventually be a bug that only affects a fixed set of iOS devices...

  • LawkyzLawkyz

    @elf_audio said:
    @Lawkyz - thanks for reporting - I've heard a few people reporting this, but can't seem to replicate - is it saying "0 BARS" at the top of the sample? How long is the bit of sample you have selected?

    No it’s sayin 4 or 8 bars ! But if you create a new session it works ! So you can reopen your first session and it works too ! It guess it’s a bug with session create with prévious version and needed to create a Brandt new session to make stretch working

    Thank again for this brilliant samurai

  • LawkyzLawkyz

    @Ailerom said:
    Tapping the bars at the top of timestretch causes an instant Crash. iPad 7, iOS 14.3

    Had the same but create a new session makes stretch working ! Then I can reopen the first session and it works too

  • AileromAilerom

    @Lawkyz said:

    @Ailerom said:
    Tapping the bars at the top of timestretch causes an instant Crash. iPad 7, iOS 14.3

    Had the same but create a new session makes stretch working ! Then I can reopen the first session and it works too

    Thanks! :)

  • AileromAilerom

    @Ailerom said:

    @Lawkyz said:

    @Ailerom said:
    Tapping the bars at the top of timestretch causes an instant Crash. iPad 7, iOS 14.3

    Had the same but create a new session makes stretch working ! Then I can reopen the first session and it works too

    Thanks! :)

    Sadly that was only half right. It worked on the new session but when loading the old it does the same thing and quits.

  • AletheiaAletheia

    I also had crashes with clicking on the bar in Stretching on 14.3 but it seems to be fine on 14.4. It also works when loading (so far).

  • LawkyzLawkyz

    @Ailerom said:

    @Ailerom said:

    @Lawkyz said:

    @Ailerom said:
    Tapping the bars at the top of timestretch causes an instant Crash. iPad 7, iOS 14.3

    Had the same but create a new session makes stretch working ! Then I can reopen the first session and it works too

    Thanks! :)

    Sadly that was only half right. It worked on the new session but when loading the old it does the same thing and quits.

    Weird I just rest with 8 old sessions and stretch works fine... maybe a reboot of your phone ?

  • mrufino1mrufino1

    @Samu said:

    @Ailerom said:
    Tapping the bars at the top of timestretch causes an instant Crash. iPad 7, iOS 14.3

    If you're already on iPadOS14.3 it doesn't 'hurt' to update to iPadOS14.4 and try.

    I can't replicate the crash on my iPhone 8 nor the iPad Air 2, both running iOS/iPadOS14.4.
    If it was iPadOS14.3 related bug the betas I tested would have crashed on me but they didn't?!

    So this could eventually be a bug that only affects a fixed set of iOS devices...

    I am downloading the update now so I haven’t tried the iap, but I read that ios 14.4 fixes a security vulnerability that was found that could allow devices to be hacked, so probably best to go to 14.4 anyway.

  • EmanresuEmanresu

    is it normal that recording from IAA only to mono

  • AileromAilerom

    @Lawkyz said:

    @Ailerom said:

    @Ailerom said:

    @Lawkyz said:

    @Ailerom said:
    Tapping the bars at the top of timestretch causes an instant Crash. iPad 7, iOS 14.3

    Had the same but create a new session makes stretch working ! Then I can reopen the first session and it works too

    Thanks! :)

    Sadly that was only half right. It worked on the new session but when loading the old it does the same thing and quits.

    Weird I just rest with 8 old sessions and stretch works fine... maybe a reboot of your phone ?

    Did that. No joy.

  • ashhashh

    Sorry for asking again but I can't find it in the thread. How do I buy the IAP? I'm guessing it's called Ninja because you have to be one to find the fucking thing?

  • gusgranitegusgranite

    @ashh said:
    Sorry for asking again but I can't find it in the thread. How do I buy the IAP? I'm guessing it's called Ninja because you have to be one to find the fucking thing?

    I think I double tapped a sequence to get the IAP to pop up.

  • ashhashh
    edited January 2021

    @gusgranite said:

    @ashh said:
    Sorry for asking again but I can't find it in the thread. How do I buy the IAP? I'm guessing it's called Ninja because you have to be one to find the fucking thing?

    I think I double tapped a sequence to get the IAP to pop up.

    I have now double-tapped everything, possibly thousand tapped a few buttons and nothing is happening. Please don't mistake this post as me thinking you're the unofficial Koala tech support. I just needed somewhere to AAAAAAAAARGH.

    As you were.

  • gusgranitegusgranite

    @ashh said:

    @gusgranite said:

    @ashh said:
    Sorry for asking again but I can't find it in the thread. How do I buy the IAP? I'm guessing it's called Ninja because you have to be one to find the fucking thing?

    I think I double tapped a sequence to get the IAP to pop up.

    Of course! It's obvious now you mention it.

    Cheers!

    Lol

  • ashhashh

    So I have now updated Koala and there it is! It's actually called Samurai so my ninja joke doesn't work, cheers @elfaudio.

  • GeorgeL909GeorgeL909

    Is there any way to trigger koala with xequence in aum without audiobus?

    I'm curious cause this seems like a brilliant idea for full track kind of thing and I adore the xequence porno roll, but I'm a bit green with midi routing stuff.

    Edit: my phone auto corrected piano roll to porno roll but I left it because I laughed so hard when proof reading.

  • gusgranitegusgranite

    @GeorgeL909 said:
    Is there any way to trigger koala with xequence in aum without audiobus?

    I'm curious cause this seems like a brilliant idea for full track kind of thing and I adore the xequence porno roll, but I'm a bit green with midi routing stuff.

    Edit: my phone auto corrected piano roll to porno roll but I left it because I laughed so hard when proof reading.

    Too funny!

    So I can sequence Koala in AUM using X0X and the general midi mapping so you should be good to go with Xequence.

  • SamplixSamplix

    What a fabulous update!!

    I made for koala a custom mode for launchpads.
    It gives you access to all 4 banks and uses the standard midi mapping (no user midi mapping needed).

    Download it here (it can be uploaded via novation components to the launchpad):
    https://www.dropbox.com/s/bhhlraloavmgdeb/Koala v2.syx?dl=0&fbclid=IwAR2QVynkEa8uvi2x1vemTJYRxrHHgSJwEMe3Ua8xSFkw8DxUk9BZwOFmlzc

    I use it with my LPP mk1
    https://github.com/mat1jaczyyy/lpp-performance-cfw
    https://fw.mat1jaczyyy.com/modes

    The pads send on midi channel 16, so you can use the other channels to play synths. The pro launchpads offer velocity output, so you can play with dynamic.. Here are my settings in koala:

Sign In or Register to comment.