Audiobus: Use your music apps together.

What is Audiobus? — Audiobus is an award-winning music app for iPhone and iPad which lets you use your other music apps together. Chain effects on your favourite synth, run the output of apps or Audio Units into an app like GarageBand or Loopy, or select a different audio interface output for each app. Route MIDI between apps — drive a synth from a MIDI sequencer, or add an arpeggiator to your MIDI keyboard — or sync with your external MIDI gear. And control your entire setup from a MIDI controller.

Download on the App Store

Audiobus is the app that makes the rest of your setup better.

usb wireless midi

2»

Comments

  • steve99steve99

    @sigma79 said:
    Dosent seem like the
    CME WIDI USB-B OTG Cable Pack II

    will be long enough to reach psu. Unless I use another power source with an extension cable for psu. How bizzare. Must have been made for power banks.

    Is this the best option?

    I use mine with a power bank (on a foot controller), but any old 5v supply will do I would think, neither the uhost or the LPD8 need a big current.

    The CME cable is not the mini connector you need for the LPD8, you’ll need an adapter or a 3rd party cable that works.

  • sigma79sigma79
    edited December 2021

    @steve99 said:

    @sigma79 said:
    Dosent seem like the
    CME WIDI USB-B OTG Cable Pack II

    will be long enough to reach psu. Unless I use another power source with an extension cable for psu. How bizzare. Must have been made for power banks.

    Is this the best option?

    I use mine with a power bank (on a foot controller), but any old 5v supply will do I would think, neither the uhost or the LPD8 need a big current.

    The CME cable is not the mini connector you need for the LPD8, you’ll need an adapter or a 3rd party cable that works.

    I bought the cable I posted. Will let you know if it works.

    Cheers Steve

  • sigma79sigma79

    @steve99 said:

    @sigma79 said:
    Dosent seem like the
    CME WIDI USB-B OTG Cable Pack II

    will be long enough to reach psu. Unless I use another power source with an extension cable for psu. How bizzare. Must have been made for power banks.

    Is this the best option?

    I use mine with a power bank (on a foot controller), but any old 5v supply will do I would think, neither the uhost or the LPD8 need a big current.

    The CME cable is not the mini connector you need for the LPD8, you’ll need an adapter or a 3rd party cable that works.

    Cable works Steve. Think it needs to be OTG.

    https://www.ebay.co.uk/itm/233207625714

    as CME said to buy this after Id bought the above.

    https://www.amazon.co.uk/Duttek-Convertor-Adapter-Macbook-Chromebook/dp/B07D4DJHX4/?th=1

    Cool. Bt, giant cue points and eq control.

  • sigma79sigma79

    Could have just used nanokey studio but this controller is ideal. Plus the faderfox ( pic I posted ) can be on the stand.

  • steve99steve99

    @sigma79 This short usb-c to usb mini cable confirmed working with Widi Uhost and Arturia Beatstep (powered by usb-c battery):

    https://www.ebay.co.uk/itm/173829339429

  • sigma79sigma79

    @steve99 said:
    @sigma79 This short usb-c to usb mini cable confirmed working with Widi Uhost and Arturia Beatstep (powered by usb-c battery):

    https://www.ebay.co.uk/itm/173829339429

    Cheers steve. Wouldnt have another controller ( sitting around ) for now. If not for your advice. Might buy a powerbank ( if needed )
    OTG is the way to go.

  • sigma79sigma79
    edited January 2022

    Thats ultrapitch. Which is probably obvious to audiobussers. The turntable can spin slower for the sound to be normal. With enough torque. Is then better to control. Think I found the correct Koala key for it to be ultrapitch ( recording )

Sign In or Register to comment.