(solved) Anyone using a Soundcraft Signature 12 ? (not the Mtk version)
I've read the manual of the 12 and the 16 but I still don't understand some stuffs about USB.
I would like to have a Group 1/2, then a Master section, so both separate 2 stereo outputs.
From that I would like to insert effects to a voice and a synth, connected to, let's say, input 1, 2 and 3 of the Signature.
That would be my first group.
Then, I'd like to have an other group, without any effects (except the internal one maybe), let's say, inputs 4,5,6, till 9/10 (on Signature 12, and till 13/14 for Signature 16)
On the Signature 12, there's only 1 stereo group, so the second group would be the master, but same concept...
An iPad wold be connected to the USB port, with a usb hub as needed. (tadam...)
As I understand, the master usb out (1 & 2, so left/right) of the iPad will be playing on the last stereo channel : so channel 11/12 for the the Signature 12 , and 15/16 on the Signature 16. Am I right ?
It is the signal out of the iPad, right ?
Then, seems I can use the aux 1 and 2 to send my analog signal to the usb inputs. Still good ?
Then, the signal would be effect processed into the iPad, then played on channel 11/12 or 15/16.
This channel should be assigned to subgroup 1 or 2 (or subgroup 1, or the master)
I hope this is clear enough, but is my scenario accurate or not ?
Thanks for your help !