Audiobus: Use your music apps together.

What is Audiobus?Audiobus is an award-winning music app for iPhone and iPad which lets you use your other music apps together. Chain effects on your favourite synth, run the output of apps or Audio Units into an app like GarageBand or Loopy, or select a different audio interface output for each app. Route MIDI between apps — drive a synth from a MIDI sequencer, or add an arpeggiator to your MIDI keyboard — or sync with your external MIDI gear. And control your entire setup from a MIDI controller.

Download on the App Store

Audiobus is the app that makes the rest of your setup better.

Can one iPad control another iPad via Bluetooth ?

Hi guys, as the title suggests.
I have a single iPad Air which I would like to use as an XY controller.
I am looking to control the iPad Pro via an XY controller app, for instance using the app koala.

So is it possible to control one iPad using another? Either over Wi-Fi, or Bluetooth?

Is this possible please?
thank you

Comments

  • @SkillipEvolver said:
    Hi guys, as the title suggests.
    I have a single iPad Air which I would like to use as an XY controller.
    I am looking to control the iPad Pro via an XY controller app, for instance using the app koala.

    So is it possible to control one iPad using another? Either over Wi-Fi, or Bluetooth?

    Is this possible please?
    thank you

    Midi is easy to send via Bluetooth g by e tween devices if that is what you mean.

  • edited March 21

    Yes.

    Blue tooth is mores stable than Wifi.

    Whether or not you use AUM, do you at least own it? That would be required so that your devices can find each other.
    (Unless there is another hack I’m unaware of).

    But depending on your needs, Wi-Fi may be suitable for you.

  • @Blipsford_Baubie said:
    Yes.

    Blue tooth is mores stable than Wifi.

    Whether or not you use AUM, do you at least own it? That would be required so that your devices can find each other.
    (Unless there is another hack I’m unaware of).

    But depending on your needs, Wi-Fi may be suitable for you.

    AUM is not required to connect ipads by bluetooth. many apps provide that functionality.

  • Yeah I own it, I was hoping this would work, and sounds like it does. Thanks guys!

  • heshes
    edited March 21

    @espiegel123 said:

    @Blipsford_Baubie said:
    Yes.

    Blue tooth is mores stable than Wifi.

    Whether or not you use AUM, do you at least own it? That would be required so that your devices can find each other.
    (Unless there is another hack I’m unaware of).

    But depending on your needs, Wi-Fi may be suitable for you.

    AUM is not required to connect ipads by bluetooth. many apps provide that functionality.

    Yes. It seems OP ended up having AUM, which can be used to create bluetooth midi connection.

    But for anyone who wants a free small utility to create bluetooth midi connection there is the 'midimittr' app, as well as several other free ones, I think.

    Once a bluetooth midi connection is created in one app, e.g., in AUM or midimittr, the connection is usable in any other app.

  • @espiegel123 said:

    @Blipsford_Baubie said:
    Yes.

    Blue tooth is mores stable than Wifi.

    Whether or not you use AUM, do you at least own it? That would be required so that your devices can find each other.
    (Unless there is another hack I’m unaware of).

    But depending on your needs, Wi-Fi may be suitable for you.

    AUM is not required to connect ipads by bluetooth. many apps provide that functionality.

    HA. Something that Drambo cannot do.

    @hes said:

    @espiegel123 said:

    @Blipsford_Baubie said:
    Yes.

    Blue tooth is mores stable than Wifi.

    Whether or not you use AUM, do you at least own it? That would be required so that your devices can find each other.
    (Unless there is another hack I’m unaware of).

    But depending on your needs, Wi-Fi may be suitable for you.

    AUM is not required to connect ipads by bluetooth. many apps provide that functionality.

    Yes. It seems OP ended up having AUM, which can be used to create bluetooth midi connection.

    But for anyone who wants a free small utility to create bluetooth midi connection there is the 'midimittr' app, as well as several other free ones, I think.

    Once a bluetooth midi connection is created in one app, e.g., in AUM or midimittr, the connection is usable in any other app.

    Thank you

  • @Blipsford_Baubie : Drambo doesn’t have Bluetooth advertising (which publishes outgoing connections) but it does allow you to connect to advertised Bluetooth.

    For apps that don’t have the advertise feature midimittr (free) can be used as hes mentioned.

  • This midimittr is great @hes and @espiegel123 , thank you for pointing me to it.
    I can get my old iPad and phone up and running much more quickly now, whereas to before it felt like a chore.
    If only the monitor button inside Koala was midi-mappable, I’d be able to immediately start making noise without any scrolling through my Drambo Layers rack in order to open Koala. Still a huge improvement to my days of yore, pre Drambo.

    What about you @SkillipEvolver ? Any luck?

  • @Blipsford_Baubie said:
    This midimittr is great @hes and @espiegel123 , thank you for pointing me to it.
    I can get my old iPad and phone up and running much more quickly now, whereas to before it felt like a chore.
    If only the monitor button inside Koala was midi-mappable, I’d be able to immediately start making noise without any scrolling through my Drambo Layers rack in order to open Koala. Still a huge improvement to my days of yore, pre Drambo.

    What about you @SkillipEvolver ? Any luck?

    Hi bud, I don't get notifications from the forum so sorry if I missed your reply here. Glad I came back to it...

    Well.. little bit rubbish tbh!
    The M-Wave Chocolate I wanted on eBay got sold (bugger). And the person I was getting expression pedal from had been busy so
    .. no progress yet!! 😕

    Although, I might well grab M-Wave for £30 on Amazon....

    So speaking of which...

    Expression pedals...
    I know that it's not always smart to go cheap cheap bottom end....
    but, a pedal... Not a whole lot to it right? Not exactly NASA-grade tech ....

    M-Audio do one, has anyone ever tried one of these? :

    https://www.ebay.co.uk/itm/166607365319?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=zCquV0KORLu&sssrc=4429486&ssuid=v48r0X3eTsC&var=&widget_ver=artemis&media=COPY

  • Hi @SkillipEvolver . I have the M-Audio Expression Pedal EX-P, and it works fine for me. You can use the pot adjustment so the minimum is above zero, just very soft. It is all (fairly heavy) plastic, so might not be suitable for a rough environment, but it's fine for home use.

  • @uncledave said:
    Hi @SkillipEvolver . I have the M-Audio Expression Pedal EX-P, and it works fine for me. You can use the pot adjustment so the minimum is above zero, just very soft. It is all (fairly heavy) plastic, so might not be suitable for a rough environment, but it's fine for home use.

    I have one as well, no complaints so far. But I've always been wary of products with non-detachable cords, and found this mod for installing a jack on the M-Audio: blackaddr.com/expression-pedal-repair-and-mod/

    Two other mods shown are also shown. One deals with "a common failure point in expression pedals is the collar that attaches to the shaft of the pot. They’re usually made of plastic and can easily crack or slide off. Even if the collar hasn’t failed yet, we can easily reinforce it so that it will be far more reliable." And the other is to add a TS jack to allow one to daisy chain a stomp switch.

  • @MarkR said:

    @uncledave said:
    Hi @SkillipEvolver . I have the M-Audio Expression Pedal EX-P, and it works fine for me. You can use the pot adjustment so the minimum is above zero, just very soft. It is all (fairly heavy) plastic, so might not be suitable for a rough environment, but it's fine for home use.

    I have one as well, no complaints so far. But I've always been wary of products with non-detachable cords, and found this mod for installing a jack on the M-Audio: blackaddr.com/expression-pedal-repair-and-mod/

    Two other mods shown are also shown. One deals with "a common failure point in expression pedals is the collar that attaches to the shaft of the pot. They’re usually made of plastic and can easily crack or slide off. Even if the collar hasn’t failed yet, we can easily reinforce it so that it will be far more reliable." And the other is to add a TS jack to allow one to daisy chain a stomp switch.

    Great idea! I might go down this road! Thanks for the post

  • @SkillipEvolver said:
    So speaking of which...

    Expression pedals...
    I know that it's not always smart to go cheap cheap bottom end....
    but, a pedal... Not a whole lot to it right? Not exactly NASA-grade tech ....

    Do you own a volume pedal by any chance? I have a really solid Boss volume pedal that I can use as an expression pedal by connecting the two TS ends of a splitter cable to the IN and OUT, and the TRS end can then be plugged in as an expression pedal.

  • @michael_m said:

    @SkillipEvolver said:
    So speaking of which...

    Expression pedals...
    I know that it's not always smart to go cheap cheap bottom end....
    but, a pedal... Not a whole lot to it right? Not exactly NASA-grade tech ....

    Do you own a volume pedal by any chance? I have a really solid Boss volume pedal that I can use as an expression pedal by connecting the two TS ends of a splitter cable to the IN and OUT, and the TRS end can then be plugged in as an expression pedal.

    Ah, oh that's pretty interesting to hear that's possible... However, no I don't own any at the mo 👎🏻

    Thanks for the thought though

Sign In or Register to comment.