Audiobus: Use your music apps together.

What is Audiobus?Audiobus is an award-winning music app for iPhone and iPad which lets you use your other music apps together. Chain effects on your favourite synth, run the output of apps or Audio Units into an app like GarageBand or Loopy, or select a different audio interface output for each app. Route MIDI between apps — drive a synth from a MIDI sequencer, or add an arpeggiator to your MIDI keyboard — or sync with your external MIDI gear. And control your entire setup from a MIDI controller.

Download on the App Store

Audiobus is the app that makes the rest of your setup better.

Switching control profiles between to pages ? Is that possible?








There is my set up of Loopy Pro.I have a problem to switch midi control profiles between to pages. I want to control 6 loops splitted on 2 rows : top row -3 loops bottom row- 3 loops and 4-th switch between rows. On the page b I want to control 4 buttons changing pitch of special loops from page a.I created on each page buttons. On page A - button(Page B)-shows page B and switch control profile 2 ,on page B - button (Page A) shows page A and switch control profile 1 witch has global profile with top row and bottom row. But this settings does not work correct. The buttons on the blueBoard changing buttons on to pages on one time. What is wrong? HELP ME PLEEEASE !!!

Comments

  • I notice you have a combination of Project profiles and Global profiles. Many times problems can be traced to conflicts between bindings in those two profile types. I'm not saying that's the issue, but it may be a place to look.

  • @ttrochim said:

    The first thing to do is to manually check that your profiles are working as expected by manually enabling disabling them..in case the issue is the profiles themselves.

    Open Control Settings and disable all profiles except the on that you want to be active.

    Then switch pages and manually enable/disable profiles so that only that page’s profile is active.

    When you do that, do the mappings work as expected?

    Make sure to also disable any active global profiles.

  • It looks like they still works when I switched to profile.I think the problem is with global profile .I can not switch them of when I go to profile 2 .

  • @ttrochim said:
    It looks like they still works when I switched to profile.I think the problem is with global profile .I can not switch them of when I go to profile 2 .

    You can use the disable action to make sure they are off. You could create a lid project follow action that disabled them, too.

  • @ttrochim : did you get it working?

  • Nope . There is a problem to switch between control profiles when one of it has a global profile. I have bought softstep 2 midi controller with 10 buttons. I hope it will resolve all my problems. I want to have good solution to use loopy pro with no limit.

  • @ttrochim said:
    Nope . There is a problem to switch between control profiles when one of it has a global profile. I have bought softstep 2 midi controller with 10 buttons. I hope it will resolve all my problems. I want to have good solution to use loopy pro with no limit.

    You can do it. You will need to combine several actions. Buttons and bindings, etc can perform several actions.

    If you are stuck, show screenshots of your actions and your control settings and I (or someone else) will be able to help you spot where the problem is.

    If you describe precisely what you need to happen when you make the change, I can help you. You can always pop open the control settings to see if your combination of actions enabled/disabled the right profiles.

    Btw, if your global profiles are controlling widgets, you might really want to consider using only local profiles.

  • edited February 22

    do sterowania używam BlueBoard . mam więc do dyspozycji 4 przyciski . Na stronie A utworzyłem 2 grupy po 3 loopy. A więc w górnym rzędzie są 3 loopy sterowane + 1 do przełączania recznego i tak samo w dolnym rzędzie . Utworzyłem więc profile globalne dla Top Row i Bottom row aby 4 przyciskiem przechodzic do poszczególnych rzędów




    Taka konfiguracja działa .
    Na stronie B utworzyłem przyciski które po naciśnięciu będą zmieniały wysokość dźwięku wybranych klipów ze strony A.Utworzyłem więc Profile control 2
    Na każdej ze stron utworzyłem przyciski (Page A )na stronie B i (Page B) na stronie A .Chcę aby naciskając odpowiedni przycisk przechodziło się na drugą stronę zmieniając jednocześnie odpowiednią konfigurację midi control dla danej strony z tym że na stronie A jest profil lokalny i 2 globalne .

  • @ttrochim : besides switch you may need to use enable and disable options. Switch just applies to the selected global or local profiles. You can have additional actions to enable and disable profiles

  • Próbowałem też i tak. Gdzieś popełniam błąd i nie wiem gdzie.

  • @ttrochim said:
    Próbowałem też i tak. Gdzieś popełniam błąd i nie wiem gdzie.

    It is a little hard to follow exactly what is going on. Let’s start by having you post a screenshot of your control settings that shows the names of all the profiles : local and global.

    Then let’s have you create button widgets that get the correct profiles selected for each combination that you need . By doing it this way, we can focus on which actions you need to get them set up correctly.

    See this article about how to take screenshots on an iPad device (rather than taking photos using another device):
    https://support.apple.com/guide/ipad/take-a-screenshot-ipad08a40f3b/ipados#:~:text=Take a full-page screenshot

    Take a screenshot that shows all the profiles.

    Then tell me how many profile combinations you need. I think it is only two. Then
    list exactly which profiles need to be enabled for each combination.

    For example, “for case number 1: only local profile B and global profile G should be enabled.”

    Try to create a button that disables each profile that should be disabled and enables each profile that should be enabled. If you have trouble making that work, post screenshots that show the widget’s actions and shows each action’s setup.

Sign In or Register to comment.