Audiobus: Use your music apps together.

What is Audiobus?Audiobus is an award-winning music app for iPhone and iPad which lets you use your other music apps together. Chain effects on your favourite synth, run the output of apps or Audio Units into an app like GarageBand or Loopy, or select a different audio interface output for each app. Route MIDI between apps — drive a synth from a MIDI sequencer, or add an arpeggiator to your MIDI keyboard — or sync with your external MIDI gear. And control your entire setup from a MIDI controller.

Download on the App Store

Audiobus is the app that makes the rest of your setup better.

[OUT] BounceBud - Physics based MIDI Generator

2

Comments

  • @Gavinski said:

    @Gavinski said:

    @auxpin said:
    I joined this forum just now so I could comment on this and a few other apps Ive been enjoying.

    @cem_olcay I spotted BounceBud in the latest video @Gavinski posted on Twitter. Reminds me of the much used Tombola sequencer in op1. I'd definitely love to test if you need anyone else.

    Welcome to the channel! Yeah bounce bud is super cool 😎

    Oh, I meant ‘welcome to the forum’ haha

    Haha. Ta for welcome :)

  • Hey @cem_olcay i just sent over a few DM’s about the beta. Cheers!

  • I uploaded a new beta version with the fixes you reported to me. Please let me know if everything is working alright, thanks 🙏

  • The landing page is ready!
    http://keybudapp.com/bouncebud

    I'd like to release the last beta build if everything works fine. Please let me know if you have any issues.

  • Cool! Can’t wait to play @cem_olcay

  • I released a new build. You need to press the play button to arm the sequencer (sorry I should have done it earlier 😂)
    I'm also planning to release this version if I don't get any reports (all reports are positive so far).

  • @cem_olcay said:
    I released a new build. You need to press the play button to arm the sequencer (sorry I should have done it earlier 😂)
    I'm also planning to release this version if I don't get any reports (all reports are positive so far).

    Thanks, will test it out now.

  • Looks nice! Can't wait to play with it ^_^.

  • The app is out everyone. Can’t wait to hear your experience with it!

    https://apps.apple.com/tr/app/bouncebud-physics-based-midi/id6464171933

  • Demo and giveaway for 5 ppl to win any Cem app here!

  • Thanks for the video @Gavinski 🙏

    After watching the video, I realized I haven’t mentioned anywhere about that you can tap the balls to change their direction. It was something for debug purposes but I leave it in the app. Maybe I should update the tutorial 😅

    About the key/scale picker being in the settings menu, they wouldn’t fit in the bottom toolbar on the iPhones. But I can add them on the iPad app only.

    You should also definitely try the ‘shooting walls with the MIDI input’ feature, it’s super fun!

  • @cem_olcay said:
    Thanks for the video @Gavinski 🙏

    After watching the video, I realized I haven’t mentioned anywhere about that you can tap the balls to change their direction. It was something for debug purposes but I leave it in the app. Maybe I should update the tutorial 😅

    About the key/scale picker being in the settings menu, they wouldn’t fit in the bottom toolbar on the iPhones. But I can add them on the iPad app only.

    You should also definitely try the ‘shooting walls with the MIDI input’ feature, it’s super fun!

    Thanks Cem, ha! I tried flicking the balls but I didn’t tap them, great to know, and hell yes that should be in the manual lol. Great news about scale and key, and yes I will definitely try the shooting walls thing, cheers!

  • @cem_olcay said:
    The app is out everyone. Can’t wait to hear your experience with it!

    https://apps.apple.com/tr/app/bouncebud-physics-based-midi/id6464171933

    Yes 🙌🏻 this is one of your best apps, imo. Been having a blast with it so far. Excellent work as always. I can see it becoming a go to app for me.

  • edited September 2023

    Well, so this is what I got:

    Pretty cool, I think. A single instance of Bounce Bud is doing all the heavy lifting here, no other sequencing or live playing involved. 7 ‘balls’ in different combinations for the top, sides, and bottom of the box driving two instances of Decent Sampler, running a toy piano sample and some modular noises, plus some Dexed, Lo-Fi Tape x 2, and Beathawk, just being used as a sample player. Some reverb, and the wonderful YaleD reverse tape delay, and job’s a good’n. Video: found footage of ice crystals growing in a dish, chucked through CapCut, Glitch Art Studio and iMovie.

    Ice 9 because Vonnegut, obviously, and because the almost granular crackling noises made me think of ice freezing on a lake.

    I think I’m going to be getting a lot of use out of this, @cem_olcay. Thanks! :)

  • Always enjoyable to listen to your pieces Irena. And yes, this is easily my favourite Bud release in a while,

  • This is fun...

  • Am trying the ‘shoot walls’ thing with no noticeable results. I think there must be something wrong in the way I have set things up. Trying to ‘shoot the top wall’ of Bouncebud with midi out from Snakebud, but no joy. Any thoughts?


  • @Gavinski said:
    Am trying the ‘shoot walls’ thing with no noticeable results. I think there must be something wrong in the way I have set things up. Trying to ‘shoot the top wall’ of Bouncebud with midi out from Snakebud, but no joy. Any thoughts?


    Ah, sending here to the virtual channel instead of the regular midi channel.

    Ps Cem, with Snakebud, in AUM Snakebud appears as a source with first the Snakebud cc midi out in the list, and then below that, the regular midi notes. Could it be changed so that the note midi appears first in the list? I constantly make mistakes with that as I am so used to the first item in the list being the right one to choose

  • I am getting a fair bit of crashing with bouncebud loaded as an AUv3 in AUM, both when feeding midi in and even when not. Anyone else?

  • edited September 2023

    @Gavinski said:
    I am getting a fair bit of crashing with bouncebud loaded as an AUv3 in AUM, both when feeding midi in and even when not. Anyone else?

    I've uploaded a new version v1.1 fixing the crash issue. Plus some minor fixes as well. It will be live shortly.

    The app has so many layers (MIDI layer, audio layer, game engine graphics layer, game engine physics layer, app interface layer) and coordination between them is definitely not easy. Great challenge though :smiley:

  • @cem_olcay said:

    @Gavinski said:
    I am getting a fair bit of crashing with bouncebud loaded as an AUv3 in AUM, both when feeding midi in and even when not. Anyone else?

    I've uploaded a new version v1.1 fixing the crash issue. Plus some minor fixes as well. It will be live shortly.

    The app has so many layers (MIDI layer, audio layer, game engine graphics layer, game engine physics layer, app interface layer) and coordination between them is definitely not easy. Great challenge though :smiley:

    Good to hear the fix is coming. Very cool app Cem!

  • GUBGUB
    edited September 2023

    It’s fun, I enjoy it, but it is crashing regularly as an AUv3 plugin in ApeMatrix. Using latest iOS

    Edit: I see now that crash issues are being addressed, so fingers crossed

  • @GUB said:
    It’s fun, I enjoy it, but it is crashing regularly as an AUv3 plugin in ApeMatrix. Using latest iOS

    Edit: I see now that crash issues are being addressed, so fingers crossed

    Yeah, the update is ready but it’s stuck in the “in review” state, it should have been released by now 😭
    I’ve sent an email to Apple, hope they fix it and release the update.

  • The new version is released finally. Let me know your experience.

  • @cem_olcay said:
    The new version is released finally. Let me know your experience.

    Balls still get stuck inside notes but maybe that wasn't in this update, or maybe you don't see it as an issue?

  • Really enjoying this.

  • I got lost in a project with a couple instances of this the night before last. I think I lost about 4 hours playing with these balls lol

    Seriously though, this is a super fun app! Thanks for this @cem_olcay

  • Great app! Thanks Cem. Don’t hesitate to buy this one.

  • @Pxlhg said:

    @cem_olcay said:
    The new version is released finally. Let me know your experience.

    Balls still get stuck inside notes but maybe that wasn't in this update, or maybe you don't see it as an issue?

    I kind of like that 'feature' 😂, maybe it should be refined and made into an option that does a kind of ratcheting effect

Sign In or Register to comment.