Audiobus: Use your music apps together.

What is Audiobus? — Audiobus is an award-winning music app for iPhone and iPad which lets you use your other music apps together. Chain effects on your favourite synth, run the output of apps or Audio Units into an app like GarageBand or Loopy, or select a different audio interface output for each app. Route MIDI between apps — drive a synth from a MIDI sequencer, or add an arpeggiator to your MIDI keyboard — or sync with your external MIDI gear. And control your entire setup from a MIDI controller.

Download on the App Store

Audiobus is the app that makes the rest of your setup better.

Wah Pedal by Nembrini Audio - Free

WhiteWhite
in General App Discussion

https://apps.apple.com/app/id6444608537

Description:

Nembrini Audio Wah is modeled on the Wah pedal created by Thomas Organ* Company and manufactured by JEN in Italy.
This is the unmistakable wah tone heard on Hendrix classics like "Up From the Sky," "Voodoo Child (Slight Return)," "Little Miss Lover" and "Still Raining, Still Dreaming." The Nembrini Audio Wah reproduces these timbres.

Works as a standalone app, AudioUnit v3 effect, or Inter-App Audio effect

Details:
Universal: Yes
Minimum OS version: 9.3
Rated: 0 based on 0 votes

Comments

  • SawitonSawiton

    And a Merry (insert winter solstice holiday of your choice) to you, too!

  • SimonSimon

    Thank you Nembrini!

  • VoytecGVoytecG

    It sounds very promising. Now I have to try it on stage monitors and PA system.

  • Stuntman_mikeStuntman_mike

    Awesome!

  • mojozartmojozart

    https://www.nembriniaudio.com/collections/pedals-tools/products/wah-pedal

  • Montreal_MusicMontreal_Music

    I guess I can use a midi LFO to simulate an auto-wah?

  • mojozartmojozart

    @Montreal_Music that should work well, as filter is an automation param. apeMatrix makes this trivial to configure.

    You can also use an envelope follower like FAC Evolver for a touch-wah effect.

  • VoytecGVoytecG

    @VoytecG said:
    It sounds very promising. Now I have to try it on stage monitors and PA system.

    It works very well, without that overly loud notch in the E4-G4 region. Works great on an electric piano.
    Cheers

  • PoppadocrockPoppadocrock

    Awesome app, throw an lfo on the filter and Wah forever

  • PoppadocrockPoppadocrock

    @mojozart said:
    @Montreal_Music that should work well, as filter is an automation param. apeMatrix makes this trivial to configure.

    You can also use an envelope follower like FAC Evolver for a touch-wah effect.

    Good idea

  • filo01filo01

    @Poppadocrock said:

    @mojozart said:
    @Montreal_Music that should work well, as filter is an automation param. apeMatrix makes this trivial to configure.

    You can also use an envelope follower like FAC Evolver for a touch-wah effect.

    Good idea

    Could I ask you for explanation of "touch-wah"? I would like to control the intensity of the wah effect according to the strength of the input signal (guitar) with some custom predefined curve. Does the FAC Envolver do this or do I need another tool? I use Loopy Pro as host.

  • wimwim
    edited September 2

    @filo01 - yes, FAC Envolver is able to do this. You would put Envolver before Nembrini WAH in your signal chain where it will listen to the guitar signal and trigger the envelope on the transients. It will then send out a midi CC message that you can map to AUv3 parameters to automate the Filter AUv3 parameter.

    To simplify the midi learn process, disable the 2nd envelope output.

  • filo01filo01

    @wim said:
    @filo01 - yes, FAC Envolver is able to do this. You would put Envolver in your signal chain where it will listen to the guitar signal and trigger the envelope on the transients. It will then send out a midi CC messag that you can map to AUv3 parameters to automate the Filter AUv3 parameter.

    Great, thank you!

  • GavinskiGavinski

    @filo01 said:

    @wim said:
    @filo01 - yes, FAC Envolver is able to do this. You would put Envolver in your signal chain where it will listen to the guitar signal and trigger the envelope on the transients. It will then send out a midi CC messag that you can map to AUv3 parameters to automate the Filter AUv3 parameter.

    Great, thank you!


    Hi Filo! This vid I did shows how btw 🙏

  • DrrabbitfootDrrabbitfoot

    @Gavinski said:

    @filo01 said:

    @wim said:
    @filo01 - yes, FAC Envolver is able to do this. You would put Envolver in your signal chain where it will listen to the guitar signal and trigger the envelope on the transients. It will then send out a midi CC messag that you can map to AUv3 parameters to automate the Filter AUv3 parameter.

    Great, thank you!


    Hi Filo! This vid I did shows how btw 🙏

    Yeah this was hella informative

  • GavinskiGavinski

    @Drrabbitfoot said:

    @Gavinski said:

    @filo01 said:

    @wim said:
    @filo01 - yes, FAC Envolver is able to do this. You would put Envolver in your signal chain where it will listen to the guitar signal and trigger the envelope on the transients. It will then send out a midi CC messag that you can map to AUv3 parameters to automate the Filter AUv3 parameter.

    Great, thank you!


    Hi Filo! This vid I did shows how btw 🙏

    Yeah this was hella informative

    Thnx Doc!

  • filo01filo01

    @Gavinski said:

    @filo01 said:

    @wim said:
    @filo01 - yes, FAC Envolver is able to do this. You would put Envolver in your signal chain where it will listen to the guitar signal and trigger the envelope on the transients. It will then send out a midi CC messag that you can map to AUv3 parameters to automate the Filter AUv3 parameter.

    Great, thank you!


    Hi Filo! This vid I did shows how btw 🙏

    Super useful tutorial, thank you @Gavinski. I think the Envolver will be a nice tool for reverb and delay ducking too.

Sign In or Register to comment.