Audiobus: Use your music apps together.

What is Audiobus? — Audiobus is an award-winning music app for iPhone and iPad which lets you use your other music apps together. Chain effects on your favourite synth, run the output of apps or Audio Units into an app like GarageBand or Loopy, or select a different audio interface output for each app. Route MIDI between apps — drive a synth from a MIDI sequencer, or add an arpeggiator to your MIDI keyboard — or sync with your external MIDI gear. And control your entire setup from a MIDI controller.

Download on the App Store

Audiobus is the app that makes the rest of your setup better.

Scaler 2: 2022 GameChangier iPad port out NOW!!

1…192021222325»

Comments

  • SpudSpud

    @el_bo said:
    Another member, in another thread, mentioned that there might be some kind of restrictions prohibiting full offline use. Can anyone confirm or deny?

    Thanks :)

    There's a bug that causes the app to revert to free/limited mode when offline that the devs are aware of and will apparently address in an upcoming update.

  • el_boel_bo

    @Spud said:

    @el_bo said:
    Another member, in another thread, mentioned that there might be some kind of restrictions prohibiting full offline use. Can anyone confirm or deny?

    Thanks :)

    There's a bug that causes the app to revert to free/limited mode when offline that the devs are aware of and will apparently address in an upcoming update.

    Ah, gotcha! Good to know.

    Thanks :)

  • wimwim
    edited July 2022

    @tahiche said:
    Hi,
    This is probably obvious but I can’t seem to figure it out… How do you turn off input note monitoring on Scaler?.
    I have some chords in one track (recorded them from an instance of scaler but that’s not relevant) and I put an instance of scaler on another where I want to explore alternate chords based on the input.
    I’m guessing you have to use “detect” to listen to the input chords for alternate options and scales… but the input notes are always played. I don’t want to hear the input notes but my alternates (B or C in scaler).
    I hope it’s clear…. Basically I want to turn off monitoring, I don’t want to hear the input notes. Should be basic but I can’t find it.
    Thanks!

    Humm. I can't find any setting in Scaler 2 for that. Maybe someone like @CapnWillie can answer that one. If it's not possible then maybe you can do something with channel filter modules?

    PD: @wim what app do you use for screenshot doodling?. I like those arrows and text 👍

    That's just the built-in iOS screenshot thingy. If you hit the + button at the bottom where the highlight tools are, it gives the options for arrows, callouts, text, etc.

    I usually airdrop the screenshots to my Mac and edit them in the preview app there because I can also scale them down to 50% size to reduce storage size on the forum. The tools are basically the same on the Mac as on the iOS screen shot app except for that though.

  • tahichetahiche

    @wim said:

    @tahiche said:
    Hi,
    This is probably obvious but I can’t seem to figure it out… How do you turn off input note monitoring on Scaler?.
    I have some chords in one track (recorded them from an instance of scaler but that’s not relevant) and I put an instance of scaler on another where I want to explore alternate chords based on the input.
    I’m guessing you have to use “detect” to listen to the input chords for alternate options and scales… but the input notes are always played. I don’t want to hear the input notes but my alternates (B or C in scaler).
    I hope it’s clear…. Basically I want to turn off monitoring, I don’t want to hear the input notes. Should be basic but I can’t find it.
    Thanks!

    Humm. I can't find any setting in Scaler 2 for that. Maybe someone like @CapnWillie can answer that one. If it's not possible then maybe you can do something with channel filter modules?

    I could probably disconnect the midi input in scaler after having captured the chords but it seems like a bad workaround for a basic feature.

  • Agatha_agaAgatha_aga

    Hey guys, can someone who had problems with missing IAP without WiFi confirm that 1.1 update fixed it ?

  • SkyblazerSkyblazer

    @Agatha_aga said:
    Hey guys, can someone who had problems with missing IAP without WiFi confirm that 1.1 update fixed it ?

    Yes, it fixed it for me.

  • J_BJ_B

    does anyone know if theres anytalk of clock sync in standalone? having to use it in a daw is adding an irritating deep layer of abstraction and menu diving

  • israeliteisraelite
    edited November 2022

    FYI guys. Regular full unclock price is 22.99€ (in Eurozone). It just went up from 17.99€ black Friday sale. Waiting for Xmas now :smile:

  • ghost_forestsghost_forests
    edited January 7

    Apologies if posted on another thread but a rather hefty update to Scaler today

    What's New

    • Improvements

    • Handle bind velocity based on default or custom chord velocity.
    • Prevent a crash with the next user set selector when the folder is empty.
    • Fix a crash when sending too many change scale commands to multiple instances simultaneously.
    • Fix an issue causing the auto-play to jump to the scale playback when browsing chord sets.
    • Improve Next/Previous navigation in User chord sets when using Auto-Play.
    • Add ability to Auto-Play while in detect screen.
    • Fix Avant-Garde 5 phrase for major chords.
    • Improve Daw-Sync playback
    • Fix calculation issue causing notes with O duration in played MIDI

    • New Features

    • Add Live Sync ability to keep the Progression Builder (Section C) synchronised across other Scaler instances in realtime.
    • Add new modes for Parallel Harmony to generate progressions by thirds, fourths, and fifths.
    • Add Auto Play in browser (Section A) to enable quick preview of chord sets.
    • Add Multi Voice Output (Multi Midi Out) option to split each note of chords onto separate channels.
    • Add Global UI Velocity controls to change the strength of MIDI notes played through the interface.
    • Add ability to consolidate chords from multiple patterns into a single chord set file.

    • New Content

    • Scale Based Sequences.
    • 80s, Classical, HipHop, LoFi Chord Sets.
    • Fixed Bass Chord Sets (Triad and Extended).
    • Divisi 4 Part Chord Sets (Intended to work with Multi Midi Out).
    • Avant-Garde Phrases
    • Avant-Garde Performances
    • Internal Orchestral Bass Instrument
    • Internal LoFi Instrument

    • Improvements

    • Make undo/redo buttons always visible in Section C.
    • Clear Undo/Redo history when clearing state or when importing a state file.
    • Fix Daw-Sync timing causing playback to start early in Cubase.
    • Fix Play-Quantize offset calculation.
    • Remember the last selected scale on circle of fifths in the Voicing Editor.
  • CapnWillieCapnWillie

    @ghost_forests said:
    Apologies if posted on another thread but a rather hefty update to Scaler today

    What's New

    • Improvements

    • Handle bind velocity based on default or custom chord velocity.
    • Prevent a crash with the next user set selector when the folder is empty.
    • Fix a crash when sending too many change scale commands to multiple instances simultaneously.
    • Fix an issue causing the auto-play to jump to the scale playback when browsing chord sets.
    • Improve Next/Previous navigation in User chord sets when using Auto-Play.
    • Add ability to Auto-Play while in detect screen.
    • Fix Avant-Garde 5 phrase for major chords.
    • Improve Daw-Sync playback
    • Fix calculation issue causing notes with O duration in played MIDI

    • New Features

    • Add Live Sync ability to keep the Progression Builder (Section C) synchronised across other Scaler instances in realtime.
    • Add new modes for Parallel Harmony to generate progressions by thirds, fourths, and fifths.
    • Add Auto Play in browser (Section A) to enable quick preview of chord sets.
    • Add Multi Voice Output (Multi Midi Out) option to split each note of chords onto separate channels.
    • Add Global UI Velocity controls to change the strength of MIDI notes played through the interface.
    • Add ability to consolidate chords from multiple patterns into a single chord set file.

    • New Content

    • Scale Based Sequences.
    • 80s, Classical, HipHop, LoFi Chord Sets.
    • Fixed Bass Chord Sets (Triad and Extended).
    • Divisi 4 Part Chord Sets (Intended to work with Multi Midi Out).
    • Avant-Garde Phrases
    • Avant-Garde Performances
    • Internal Orchestral Bass Instrument
    • Internal LoFi Instrument

    • Improvements

    • Make undo/redo buttons always visible in Section C.
    • Clear Undo/Redo history when clearing state or when importing a state file.
    • Fix Daw-Sync timing causing playback to start early in Cubase.
    • Fix Play-Quantize offset calculation.
    • Remember the last selected scale on circle of fifths in the Voicing Editor.

    More gamechangier magicisms!!! 🪄 Thanks for the heads up.

  • ArtvargArtvarg

    I can‘t get the different Scaler Plugins (Scaler 2, ScalerAudio 2, ScalerControl 2) to sync to each other. Scaler 2 can sync to another Scaler 2 instance, but the ScalerAudio 2 on my input channel can’t see the Scaler 2 instances. Don‘t know if this is a bug.
    Maybe theres another way to achieve what I want to do, or I‘m just dumb. Basically I want to analyse the chords from the input channel and send them to other Scaler instances to play different instruments. I use Loopy Pro as a host. Anyone got any ideas?

  • J_BJ_B

    i have spent so much time fucking around trying to get this to work. does anyone know can you or can you not sync this thing in standalone? I simply want to slave it to my octatrack and send midi out to a synth and its a nightmare.

  • BroCoastBroCoast

    @J_B said:
    i have spent so much time fucking around trying to get this to work. does anyone know can you or can you not sync this thing in standalone? I simply want to slave it to my octatrack and send midi out to a synth and its a nightmare.

    Pretty sure you need to host as an AU it to sync.

  • J_BJ_B

    @BroCoast said:

    @J_B said:
    i have spent so much time fucking around trying to get this to work. does anyone know can you or can you not sync this thing in standalone? I simply want to slave it to my octatrack and send midi out to a synth and its a nightmare.

    Pretty sure you need to host as an AU it to sync.

    man that sucks

Sign In or Register to comment.