Audiobus: Use your music apps together.

What is Audiobus? — Audiobus is an award-winning music app for iPhone and iPad which lets you use your other music apps together. Chain effects on your favourite synth, run the output of apps or Audio Units into an app like GarageBand or Loopy, or select a different audio interface output for each app. Route MIDI between apps — drive a synth from a MIDI sequencer, or add an arpeggiator to your MIDI keyboard — or sync with your external MIDI gear. And control your entire setup from a MIDI controller.

Download on the App Store

Audiobus is the app that makes the rest of your setup better.

miRack Patch Share

24

Comments

  • skiphuntskiphunt

    @oat_phipps said:

    @skiphunt said:
    Ok, I have really no clue what I’m doing... but I made this little weird thing.

    https://www.dropbox.com/s/l7y8wvlz2occ9w3/Scheumsamy.mrk?dl=0

    Crashes for me. The only one Ive gotten to work was the one that was zipped, unzipped in Audioshare, then loadednthe .vcv file in

    Yeah, I’m not quite sure how they’re preparing the files. Here’s another attempt, and I’m heading to bed

    https://www.dropbox.com/s/e7ufli0p4krzz3a/Scheumsamy.zip?dl=0

  • oat_phippsoat_phipps

    @skiphunt said:

    @oat_phipps said:

    @skiphunt said:
    Ok, I have really no clue what I’m doing... but I made this little weird thing.

    https://www.dropbox.com/s/l7y8wvlz2occ9w3/Scheumsamy.mrk?dl=0

    Crashes for me. The only one Ive gotten to work was the one that was zipped, unzipped in Audioshare, then loadednthe .vcv file in

    Yeah, I’m not quite sure how they’re preparing the files. Here’s another attempt, and I’m heading to bed

    https://www.dropbox.com/s/e7ufli0p4krzz3a/Scheumsamy.zip?dl=0

    Worked. Cool!

  • _mwallace_mwallace

    @skiphunt said:

    @oat_phipps said:

    @skiphunt said:
    Ok, I have really no clue what I’m doing... but I made this little weird thing.

    https://www.dropbox.com/s/l7y8wvlz2occ9w3/Scheumsamy.mrk?dl=0

    Crashes for me. The only one Ive gotten to work was the one that was zipped, unzipped in Audioshare, then loadednthe .vcv file in

    Yeah, I’m not quite sure how they’re preparing the files. Here’s another attempt, and I’m heading to bed

    https://www.dropbox.com/s/e7ufli0p4krzz3a/Scheumsamy.zip?dl=0

    Nice, it worked! Thanks.
    That xy pad module is fun.

  • JumpercollinsJumpercollins

    Cheers @skiphunt works great. Yes that x y pad module is very clever.

  • Pierre118Pierre118

    Thanks @auxmux Working great now!

  • ajmillerajmiller

    @skiphunt thanks - works great and really useful to learn how to use the app.

  • mifkimifki

    I'll make it possible to open patches from .zip files in the next update, just wait a bit :)

  • rs2000rs2000

    @mifki said:
    I'll make it possible to open patches from .zip files in the next update, just wait a bit :)

    I've found that even with the "working" .mrk files, opening one in an already running miRack always crashes it. Trying a second time works.

    This thread might soon reach 1000 posts, VCVrack on iOS is unbelievable!!!
    Thank you for taking care, @mifki :+1:

  • mifkimifki

    @rs2000 said:
    This thread might soon reach 1000 posts, VCVrack on iOS is unbelievable!!!
    Thank you for taking care, @mifki :+1:

    Thanks!
    But please don't call it "VCV Rack on iOS" to avoid confusion, respect everyone's trademarks, etc., etc.

  • rs2000rs2000

    @mifki said:

    @rs2000 said:
    This thread might soon reach 1000 posts, VCVrack on iOS is unbelievable!!!
    Thank you for taking care, @mifki :+1:

    Thanks!
    But please don't call it "VCV Rack on iOS" to avoid confusion, respect everyone's trademarks, etc., etc.

    Sorry, I must have mixed up open-source freedom with free speech.

  • mifkimifki

    @rs2000 said:

    @mifki said:

    @rs2000 said:
    This thread might soon reach 1000 posts, VCVrack on iOS is unbelievable!!!
    Thank you for taking care, @mifki :+1:

    Thanks!
    But please don't call it "VCV Rack on iOS" to avoid confusion, respect everyone's trademarks, etc., etc.

    Sorry, I must have mixed up open-source freedom with free speech.

    I mean, it doesn't really matter on forums, and I neither can nor want to prevent people calling it whatever they want. It's mostly a recommendation for things attracting more public attention like reviews / news articles.

  • espiegel123espiegel123

    @rs2000 said:

    @mifki said:

    @rs2000 said:
    This thread might soon reach 1000 posts, VCVrack on iOS is unbelievable!!!
    Thank you for taking care, @mifki :+1:

    Thanks!
    But please don't call it "VCV Rack on iOS" to avoid confusion, respect everyone's trademarks, etc., etc.

    Sorry, I must have mixed up open-source freedom with free speech.

    @rs2000 : Calling it vcv rack will cause confusion as some (many) users will think and expect more compatibility than there is and will be...and might result bad blood between the vcv rack developer and @mifki .

  • rs2000rs2000

    @espiegel123 said:

    @rs2000 said:

    @mifki said:

    @rs2000 said:
    This thread might soon reach 1000 posts, VCVrack on iOS is unbelievable!!!
    Thank you for taking care, @mifki :+1:

    Thanks!
    But please don't call it "VCV Rack on iOS" to avoid confusion, respect everyone's trademarks, etc., etc.

    Sorry, I must have mixed up open-source freedom with free speech.

    @rs2000 : Calling it vcv rack will cause confusion as some (many) users will think and expect more compatibility than there is and will be...and might result bad blood between the vcv rack developer and @mifki .

    No worries.
    Fights between developers is the least we want, they're a rare breed already o:)
    I was happy to hear that a number of 3rd-party module developers support @mifki's efforts :+1:

  • reasOnereasOne

    @auxmux said:
    I'm super excited about miRack coming out, thanks @mifki!

    Wanted to create a thread to share patches and patch ideas, separate from the app discussion.

    Since I'm new to modular as well, I'm keeping the architecture of my patches relatively simple.

    In this patch, I structured things somewhat like a Roland SH101: single oscillator, a vcf, no filter envelope, vca with amp envelope. I also included a delay and a spring reverb. The sound goes through compressor before hitting the audio outputs. Dropbox link below.

    There are also two midi modules. One for notes input and another Midi to CC module for controlling cv/parameters of different modules. Here, two points are patched to CV inputs on the oscillator to shape the sound. Just change the source on the top midi module to play with an external controller. In the video, I'm using Velocity Keyboard over Bluetooth from another iPad.

    There's a keyboard module as well for playing the patch from within miRack. Just change the cv/gate outputs from the midi input module to the outputs here. Scopes are good for visuals. :)

    Dropbox link:
    https://www.dropbox.com/s/4erq6rprem8vmcf/Simple Harmonics.zip?dl=0

    This patch is called - Simple Harmonics

    Download the zip file of the patch and unzip it in Audioshare and then open the mrk file in miRack.

    Long term, @mifki will long for a better solution.

    Got your patch to work! It’s nice man!
    Gonna add to it and share back....

    However, it won’t save , when I go back to my patch selection screen it isn’t there

    Also when I load it from AudioShare it says something about being converted to a new version.
    Any idea @mifki

  • mifkimifki

    @reasOne said:
    However, it won’t save , when I go back to my patch selection screen it isn’t there

    Also when I load it from AudioShare it says something about being converted to a new version.
    Any idea @mifki

    I'm not sure how opening from AudioShare works, I'll check.

  • sigma79sigma79

    Do any patches load modules so I can see how things work?

    Thanks.

  • auxmuxauxmux
    edited September 2019

    @reasOne said:

    @auxmux said:
    I'm super excited about miRack coming out, thanks @mifki!

    Wanted to create a thread to share patches and patch ideas, separate from the app discussion.

    Since I'm new to modular as well, I'm keeping the architecture of my patches relatively simple.

    In this patch, I structured things somewhat like a Roland SH101: single oscillator, a vcf, no filter envelope, vca with amp envelope. I also included a delay and a spring reverb. The sound goes through compressor before hitting the audio outputs. Dropbox link below.

    There are also two midi modules. One for notes input and another Midi to CC module for controlling cv/parameters of different modules. Here, two points are patched to CV inputs on the oscillator to shape the sound. Just change the source on the top midi module to play with an external controller. In the video, I'm using Velocity Keyboard over Bluetooth from another iPad.

    There's a keyboard module as well for playing the patch from within miRack. Just change the cv/gate outputs from the midi input module to the outputs here. Scopes are good for visuals. :)

    Dropbox link:
    https://www.dropbox.com/s/4erq6rprem8vmcf/Simple Harmonics.zip?dl=0

    This patch is called - Simple Harmonics

    Download the zip file of the patch and unzip it in Audioshare and then open the mrk file in miRack.

    Long term, @mifki will long for a better solution.

    Got your patch to work! It’s nice man!
    Gonna add to it and share back....

    However, it won’t save , when I go back to my patch selection screen it isn’t there

    Also when I load it from AudioShare it says something about being converted to a new version.
    Any idea @mifki

    Thanks @reasOne After you opened it, you clicked on "My Patches" to go back to miRack patch library. That's worked for me when I've downloaded other patches.

    Another option could be to try to save the patch from Audioshare to miRack iCloud directory using Files.app

  • reasOnereasOne

    @auxmux said:

    @reasOne said:

    @auxmux said:
    I'm super excited about miRack coming out, thanks @mifki!

    Wanted to create a thread to share patches and patch ideas, separate from the app discussion.

    Since I'm new to modular as well, I'm keeping the architecture of my patches relatively simple.

    In this patch, I structured things somewhat like a Roland SH101: single oscillator, a vcf, no filter envelope, vca with amp envelope. I also included a delay and a spring reverb. The sound goes through compressor before hitting the audio outputs. Dropbox link below.

    There are also two midi modules. One for notes input and another Midi to CC module for controlling cv/parameters of different modules. Here, two points are patched to CV inputs on the oscillator to shape the sound. Just change the source on the top midi module to play with an external controller. In the video, I'm using Velocity Keyboard over Bluetooth from another iPad.

    There's a keyboard module as well for playing the patch from within miRack. Just change the cv/gate outputs from the midi input module to the outputs here. Scopes are good for visuals. :)

    Dropbox link:
    https://www.dropbox.com/s/4erq6rprem8vmcf/Simple Harmonics.zip?dl=0

    This patch is called - Simple Harmonics

    Download the zip file of the patch and unzip it in Audioshare and then open the mrk file in miRack.

    Long term, @mifki will long for a better solution.

    Got your patch to work! It’s nice man!
    Gonna add to it and share back....

    However, it won’t save , when I go back to my patch selection screen it isn’t there

    Also when I load it from AudioShare it says something about being converted to a new version.
    Any idea @mifki

    Thanks @reasOne After you opened it, you clicked on "My Patches" to go back to miRack patch library. That's worked for me when I've downloaded other patches.

    Another option could be to try to save the patch from Audioshare to miRack iCloud directory using Files.app

    Ya that typically works but this guy is being stubborn hahaa

  • auxmuxauxmux
    edited September 2019

    Haha oops. I think this one was created with 1.0 not beta, but I don't know if that's an issue. @mifki?

  • FingolfinzzzFingolfinzzz

    Not going to pretend I know what I’m doing but here’s one with some drums sequences and some randomness and sort of generativeness
    https://www.dropbox.com/s/yl1vihi0gsxy1l0/Rhaymsuli.zip?dl=0

  • ajmillerajmiller

    Nice one thanks! Shows us noobs what’s possible with this app!

    @JackDwyerburger said:
    Not going to pretend I know what I’m doing but here’s one with some drums sequences and some randomness and sort of generativeness
    https://www.dropbox.com/s/yl1vihi0gsxy1l0/Rhaymsuli.zip?dl=0

  • FingolfinzzzFingolfinzzz
    edited September 2019

    @ajmiller said:
    Nice one thanks! Shows us noobs what’s possible with this app!

    @JackDwyerburger said:
    Not going to pretend I know what I’m doing but here’s one with some drums sequences and some randomness and sort of generativeness
    https://www.dropbox.com/s/yl1vihi0gsxy1l0/Rhaymsuli.zip?dl=0

    Thanks! I’m going to attempt to do a synth using the fm operators next, I’ll post it up here when I get it ready

  • rs2000rs2000

    Here's some simple physical modeling fun:
    https://www.dropbox.com/s/1jy0f6q4vy2tfqg/Phyzac2.zip?dl=0

  • auxmuxauxmux

    I know what I'm doing tonight.

  • cuezaireekaacuezaireekaa

    @rs2000 said:
    Here's some simple physical modeling fun:
    https://www.dropbox.com/s/1jy0f6q4vy2tfqg/Phyzac2.zip?dl=0

    Sounds like every 80's movie I loved!!!!! Great!

  • FingolfinzzzFingolfinzzz

    Here’s a super basic one with the fm operators. I’m going to do a lot more with it though but I need to draw some stuff out https://www.dropbox.com/s/yh947ieo11md8zb/Fm synth.zip?dl=0

  • rs2000rs2000

    @cuezaireekaa said:

    @rs2000 said:
    Here's some simple physical modeling fun:
    https://www.dropbox.com/s/1jy0f6q4vy2tfqg/Phyzac2.zip?dl=0

    Sounds like every 80's movie I loved!!!!! Great!

    Thank you o:)

  • Paul16Paul16
    edited September 2019

    Thanks for all the shared patches, most delightful.

    Still haven’t grokked the modular mysteries, so feel that I can only be held
    partly responsible for this dirty mess. Please excuse any heinous schoolboy
    errors & i’d be interested to hear from anyone as to how I can extrapolate my
    naive cabling efforts. I dare say that there’s stuff hooked up that contravenes
    any number of protocols but posted in the spirit of the thread.
    Was just pleased to get some vaguely ordered noises out of it tbh 😄

    Can see this being a lot of time consuming fun.

    https://www.dropbox.com/sh/4ejcyu1pxqnzrbs/AACpSNPYxzRMoEyG4Y_XSCU9a?dl=0

  • oat_phippsoat_phipps

    @Paul16 said:
    Thanks for all the shared patches, most delightful.

    Still haven’t grokked the modular mysteries, so feel that I can only be held
    partly responsible for this dirty mess. Please excuse any heinous schoolboy
    errors & i’d be interested to hear from anyone as to how I can extrapolate my
    naive cabling efforts. I dare say that there’s stuff hooked up that contravenes
    any number of protocols but posted in the spirit of the thread.
    Was just pleased to get some vaguely ordered noises out of it tbh 😄

    Can see this being a lot of time consuming fun.

    https://www.dropbox.com/sh/4ejcyu1pxqnzrbs/AACpSNPYxzRMoEyG4Y_XSCU9a?dl=0

    Would gladly take a look, but it only crashes for me.

  • oat_phippsoat_phipps

    @rs2000 said:
    Here's some simple physical modeling fun:
    https://www.dropbox.com/s/1jy0f6q4vy2tfqg/Phyzac2.zip?dl=0

    You had me at LinnDrum. Just discovered those modules. Hoo boy

Sign In or Register to comment.