Audiobus: Your virtual music studio.

What is Audiobus?Audiobus is an award-winning music app for iPhone and iPad which lets you use your other music apps together. Chain effects on your favourite synth, run the output of apps or Audio Units into an app like GarageBand or Loopy, or select a different audio interface output for each app. Route MIDI between apps — drive a synth from a MIDI sequencer, or add an arpeggiator to your MIDI keyboard — or sync with your external MIDI gear. And control your entire setup from a MIDI controller.

Download on the App Store

Audiobus is the app that makes the rest of your setup better.

Any iOS synth app which is accepting MIDI Bank Change and Program Change ?

Just need to try something and don't have atm here any hw synth with BC / PC support .. is there any existing iOS synth available, which accepts both those MIDI messages ?

Comments

  • edited February 6

    @dendy said:
    Just need to try something and don't have atm here any hw synth with BC / PC support .. is there any existing iOS synth available, which accepts both those MIDI messages ?

    I'd try Poison 202 first.

    The reason I suggest Poison is that I believe it's one of the few that accepts both in it's AUv3 format also.

    I started a thread a few years back. It's a bit messy, but there's some good info in there added by others since it started...

    https://forum.audiob.us/discussion/3894/bank-select-via-midi-ios-synths

  • I think I tested Xequence's PC/BC with Magellan.

  • I know the iSymphonic accepts BC/PC messages since it has so many potential presets with all the IAP packages of sounds.

  • edited February 6

    Korg iM1
    Korg iMono/Poly
    Poison-202
    Moog Model D
    Sunrizer
    The AudioKit Stuff IIRC?
    The Yonac Stuff I believe also

  • Thanks to all, i have now what i needed !

  • @dendy said:
    Just need to try something and don't have atm here any hw synth with BC / PC support .. is there any existing iOS synth available, which accepts both those MIDI messages ?

    LayR

  • All of the Moog Apps
    iVSC3

  • VOLT does as well.

  • edited February 6

    @panthera said:
    All of the Moog Apps

    False - Animoog does not have Bank select, only PC

  • edited February 7

    Updated post...

    Successfully used MSB and LSB to select presets and their banks in these apps... (PC= Program Change)

    ANIMOOG (UPDATED 2016)
    SUNRIZER (MSB for bank)
    MAGELLAN (MSB for main banks) (LSB for cache banks)
    GALILEO ( " " same as MAGELLAN)
    NANOSTUDIO EDEN (LSB for Bank Change & PC for preset)
    NLOG PRO ( some success for first bank using MSB)
    ARCTIC PRO (LSB for bank)
    THUMBJAM ( see earlier in thread for Sonosaurus' description)
    DXi (preset select via PC)
    ELECTRONIC PIANO SYNTHESIZER (preset select via PC)
    SYNTH DRUM & ARP (something was changing....no idea how, where or why :) )

    EDIT: - WAVEMAPPER (preset select via PC)

    *** EDIT 31st August 2015..... ***

    A couple of quick additions & amendments. I'll do some more testing in coming weeks.

    Virsyn apps:

    CUBE
    TERA
    Micro TERA
    all now have Bank & Program-Change functionality. MSB(0) LSB(32) + Program Change # for preset.

    apeSoft apps:

    iDensity
    iPulsaret
    Stria
    All have Program Change working in the snapshots menu. No success with Bank Change using MSB, however I see they have NRPN functionality and I'll need to test this.

    MITOSYNTH has very cool / easy Bank & Program Change functionality (thanks @dwarman). MSB(0) LSB(32) & PC

    FUNKBOX - Program Change for kits.

    CAUSTIC - Program Change ( although I'm getting midi quirkiness with any midi channel 9+. Anyone else?)
    GESTRUMENT - Programme Change for presets.
    I'll add more soon.

    NAVE - Bank & Program change using MSB(000) for Bank 1 (001) for Bank 2 etc. + Program Change. Thanks to @rad3d for adding this. I'm particularly happy to be able to do this with Nave.
    end of EDIT

    No program or bank change success with these apps...

    Thor
    Nave EDIT: See above.
    iSem
    iMini
    Addictive
    Cube EDIT: see above
    Cassini
    Wavemapper EDIT: Wavemapper DOES send program change info.
    Alchemy
    iTuttle
    Grain Science
    Voice Synth
    iPolysix
    iMS20
    TF7
    MOBILE MUSIC SEQUENCERo

  • List of apps that work with irig keys pro

    nanostudio eden
    heavy brass
    ifretless sax
    ifretless brass
    DRC
    Voice synth
    magellan
    nlog pro
    dxi
    nave
    bs-16i
    seaboard sd
    sunrizer
    addictive pro
    tera synth
    posideon
    poisen 202
    artic keys
    im1
    mood
    model 15
    sampletank

  • @Shazamm : You can add Moog Model D to that list and the audiokit synths :)

  • Damn thought it was on there lol> @MikeyP said:

    @Shazamm : You can add Moog Model D to that list and the audiokit synths :)

  • edited February 8

    @Shazamm said:
    Updated post...

    Successfully used MSB and LSB to select presets and their banks in these apps... (PC= Program Change)

    ANIMOOG (UPDATED 2016)
    SUNRIZER (MSB for bank)
    MAGELLAN (MSB for main banks) (LSB for cache banks)
    GALILEO ( " " same as MAGELLAN)
    NANOSTUDIO EDEN (LSB for Bank Change & PC for preset)
    NLOG PRO ( some success for first bank using MSB)
    ARCTIC PRO (LSB for bank)
    THUMBJAM ( see earlier in thread for Sonosaurus' description)
    DXi (preset select via PC)
    ELECTRONIC PIANO SYNTHESIZER (preset select via PC)
    SYNTH DRUM & ARP (something was changing....no idea how, where or why :) )

    EDIT: - WAVEMAPPER (preset select via PC)

    *** EDIT 31st August 2015..... ***

    A couple of quick additions & amendments. I'll do some more testing in coming weeks.

    Virsyn apps:

    CUBE
    TERA
    Micro TERA
    all now have Bank & Program-Change functionality. MSB(0) LSB(32) + Program Change # for preset.

    apeSoft apps:

    iDensity
    iPulsaret
    Stria
    All have Program Change working in the snapshots menu. No success with Bank Change using MSB, however I see they have NRPN functionality and I'll need to test this.

    MITOSYNTH has very cool / easy Bank & Program Change functionality (thanks @dwarman). MSB(0) LSB(32) & PC

    FUNKBOX - Program Change for kits.

    CAUSTIC - Program Change ( although I'm getting midi quirkiness with any midi channel 9+. Anyone else?)
    GESTRUMENT - Programme Change for presets.
    I'll add more soon.

    NAVE - Bank & Program change using MSB(000) for Bank 1 (001) for Bank 2 etc. + Program Change. Thanks to @rad3d for adding this. I'm particularly happy to be able to do this with Nave.
    end of EDIT

    No program or bank change success with these apps...

    Thor
    Nave EDIT: See above.
    iSem
    iMini
    Addictive
    Cube EDIT: see above
    Cassini
    Wavemapper EDIT: Wavemapper DOES send program change info.
    Alchemy
    iTuttle
    Grain Science
    Voice Synth
    iPolysix
    iMS20
    TF7
    MOBILE MUSIC SEQUENCERo

    @Shazamm That post of mine is pretty old now, maybe 2014/2015?

    The posts later in the thread are likely to have much more relevant info. The op can't be changed after a certain period of time. Cheers.

  • Hey @Shazamm @panthera . How does one accomplish this. I have Model D with an arturia minilab 2. When I press midi learn I get no option to map the program select.
    Please please help. Thanks.

  • edited February 8

    @ph8aerror

    i use a doepfer drehbank , so i configured a Program Change -> fu (function) Prog - Ch1

    i guess in midi cc thats CC00
    or prgram change 00

    maybe you have to set it up with arturia software once

    you can find some information here πŸ‘‡πŸΎ

    https://forum.audiob.us/discussion/3894/bank-select-via-midi-ios-synths/p6

Sign In or Register to comment.