Audiobus: Use your music apps together.

What is Audiobus?Audiobus is an award-winning music app for iPhone and iPad which lets you use your other music apps together. Chain effects on your favourite synth, run the output of apps or Audio Units into an app like GarageBand or Loopy, or select a different audio interface output for each app. Route MIDI between apps — drive a synth from a MIDI sequencer, or add an arpeggiator to your MIDI keyboard — or sync with your external MIDI gear. And control your entire setup from a MIDI controller.

Download on the App Store

Audiobus is the app that makes the rest of your setup better.

UPDATE: How to make KORG apps appear in Audiobus

edited December 2012 in Support and Feedback

UPDATE: You can now fix this by deleting and installing the Audiobus app again.


To our users: If you speak Japanese, Chinese, French, Russian, etc. can you please translate this and add it as a reply? Thank you.

This is a temporary workaround until they add their apps to the Audiobus web database (which they probably omitted to keep things a bit more secret):

  1. Launch Audiobus first.
  2. Then open all of their apps.

That's it. From then on, their apps will always be listed in Audiobus until the Audiobus app is shut down again.
This workaround will (most likely) become unnecessary in the next few days as we work together with KORG to add them to our database.


Japanese:

これはKORGがAudiobus WebデータベースにKORGのアプリを追加するまで一時的な回避策です。(彼らはぎりぎりまで公開しないようにデータベースへの登録を控えたのかもしれません)

  1. Audiobusを最初に起動してください
  2. 次にKORGのアプリケーションを開きます。

以上です。これでAudiobusアプリを終了するまで、KORGアプリはAudiobus内でつねに表示されます。この回避策は、コルグと私達が共にデータベースに追加する作業を進めており、(おそらく)今後数日で不必要になります。


French:

Il s'agit d'une solution temporaire jusqu'à ce qu'ils (Korg) ajoutent leurs applications à la base de données web Audiobus (ils ont probablement omis afin de garder les choses un peu plus secrètes):

  1. Lancer Audiobus en premier.
  2. Ensuite, ouvrez toutes leurs applications.

C'est tout. A partir de là, toutes leurs applications seront listées dans Audiobus jusqu'à ce que vous fermiez à nouveau Audiobus. Cette solution temporaire deviendra certinement inutile dans les prochains jours comme nous travaillons ensemble avec Korg pour ajouter leurs apps à notre base de donnée.


Spanish:

Como hacer aparecer las aplicaciones de Korg en Audiobus

Esto es un apaño temporal hasta que añadan sus aplicaciones a la base de datos web de Audiobus (lo que probablemente han omitido para mantener la cosas un poco más en secreto)

  1. Primero, abre Audiobus
  2. Luego, abre todas sus aplicaciones

Ya está. Desde ese momento, sus aplicaciones aparecerán en la lista de Audiobus hasta que la aplicación de Audiobus se cierre. Este apaño ya no será necesario (seguramente) dentro de unos días, ya que estamos trabajando con Korg para añadirlas a nuestra base de datos.


Russian:

Это временное решение, пока KORG не добавит свои приложения в базу данных Audiobus (что они, вероятно, опустили, чтобы держаться вещи в тайне):

  1. Запустите Audiobus сначала.
  2. Затем откройте все приложения (KORG).

Это всё. С этих пор их приложения всегда будут в списке Audiobus, пока приложение Audiobus не будет выключено. Этот способ будет (скорее всего) ненужными в ближайшие несколько дней, как только мы не вместе с KORG добавим их в нашу базу данных.


Chinese:

以下是在Korg将他们的应用加到Audiobus网络数据库之前的临时解决办法(为了保持神秘感被他们忽略掉了):

  1. 先打开Audiobus
  2. 再打开他们其它的应用

就好啦,在此之后他们的应用就会一直被列在Audiobus里。在之后我们将KORG的应用加到数据库里之后,就不需要再用这个办法了。


Deutsch:

Hier ist ein kurzfristiger Workaround um KORG apps mit Audiobus benutzen zu können, bis die Apps in unserer Datenbank eingetragen sind:

  1. Audiobus starten.
  2. Die Korg apps starten.

Das wars. Ab diesem Zeitpunkt werden sie in Audiobus auftauchen, bis Audiobus geschlossen wird (also über das Multitasking Menü beendet wird). In wenigen Tagen sollte dieser Fehler sein und kein update der Apps benötigen.


Hungarian:

MAGYAR FORDÍTÁS:

Átmeneti megoldásként, amíg a KORG nem adja hozzá az Audiobust az egyes alkalmazásaik weboldalaihoz (amit talán a dolgok titokban tartása miatt felejtettek el eddig megtenni):

  1. Indítsd el az Audiobus alkalmazást elsőként.
  2. Ezt követően indítsd el az egyes alkalmazásokat.

Ennyi az egész. Ettől kezdve az alkalmazások mindaddig láthatóak lesznek az Audiobuson belül, amíg ki nem kapcsolod az Audiobust. Ez a szükségmegoldás (nagy valószínűséggel) néhány nap múlva már nem lesz szükséges, mivel közösen dolgozunk a KORG-al, hogy sikeresen bekerüljenek alkalmazásaik az Audiobus adatbázisába.

Comments

  • French:

    Il s'agit d'une solution temporaire jusqu'à ce qu'ils (Korg) ajoutent leurs applications à la base de données web Audiobus (ils ont probablement omis afin de garder les choses un peu plus secrètes):

    1. Lancer Audiobus en premier.
    2. Ensuite, ouvrez toutes leurs applications.

    C'est tout. A partir de là, toutes leurs applications seront listées dans Audiobus jusqu'à ce que vous fermiez à nouveau Audiobus. Cette solution temporaire deviendra certinement inutile dans les prochains jours comme nous travaillons ensemble avec Korg pour ajouter leurs apps à notre base de donnée.

  • edited December 2012

    French translation/Traduction française :

    "Voici une solution provisoire, utile jusqu'à ce que KORG ait ajouté ses applications à la base de données Audiobus (ce qu'ils n'ont pas fait, probablement pour garder le secret sur leur developpement) :

    1 - Lancer Audiobus en premier.

    2 - Puis lancer toutes les applications KORG.

    C'est tout : à partir de là les applications KORG sont listées dans Audiobus jusqu'à ce que l'application Audiobus soit éteinte.

    Cette solution temporaire devrait devenir inutile dans quelques jours lorsque nous les aurons ajoutées avec l'aide de KORG à notre base de données."

  • I figured out that one on my own – by accident. :)

    Unfortunately, that was all I was able to figure out. I can't find a way to sync start, or tempo (manually setting the iPolysix tempo to an exact number is impossible or nearly so). I couldn't find any of the network MIDI settings that are supposed to be part of this update. No updated guide as of yet. Has anyone else figured this stuff out?

    I hope the folks at Korg make some improvements – gah! (I only say that because I like iPolysisx, but I want to be able to use it with things like Loopy and MultiTrack, after all)

  • Russian:

    Это временное решение, пока KORG не добавит свои приложения в базу данных Audiobus (что они, вероятно, опустили, чтобы держаться вещи в тайне):

    Запустите Audiobus сначала.
    Затем откройте все приложения (KORG).

    Это всё. С этих пор их приложения всегда будут в списке Audiobus, пока приложение Audiobus не будет выключено. Этот способ будет (скорее всего) ненужными в ближайшие несколько дней, как только мы не вместе с KORG добавим их в нашу базу данных.

  • (in Japanese with a little help of Bing Translator)

    これはKORGがAudiobus web データベースにKORGのアプリを追加するまで一時的な回避策です。(そしてKORGはおそらく公けには発表しないでしょう)

    1. Audiobus は最初に起動します。
    2. 次にすべてのKORGのアプリケーションを開きます。

    以上です。
    Audiobus アプリが終了されるまでアプリはいつも Audiobus で表示されます。この回避策は、 コルグと私達が共にデータベースに追加する作業を進めているので、(おそらく)今後数日で不必要になります。

  • russian:
    Это временное решение, пока они не добавлять свои приложения в базу данных Audiobus (которые они, вероятно, опускают, чтобы держать вещи немного тайнее):

    1. В первую очередь запустите Audiobus.
    2. Затем откройте все свои приложения.

    Вот и все. С этого момента их приложения всегда будут добавлены в Audiobus, пока приложение Audiobus не будет выключено снова. Скорее всего этот способ будет опущен в ближайшие несколько дней, так как мы работаем вместе с KORG, чтобы добавить их в нашу базу данных как можно скорее.

  • Chinese translate:

    以下是在Korg将他们的应用加到Audiobus网络数据库之前的临时解决办法(为了保持神秘感被他们忽略掉了):

    1. 先打开Audiobus
    2. 再打开他们其它的应用

    就好啦,在此之后他们的应用就会一直被列在Audiobus里。在之后我们将KORG的应用加到数据库里之后,就不需要再用这个办法了。

    And if you wish to add a chinese version for Audiobus, I can help you. Actually I run a chinese computer music website for a long time and write a lots Audiobus reports ( http://www.midifan.com/modulenews-index.htm?title=audiobus&select=1 ), definitely love it so much!

  • @musiXboy Cool, I've sent you a message with my email so you can contact me directly!
    Thank you very much.

  • Thanks to everyone translating this! It's really appreciated!

  • Hungarian Version

    MAGYAR FORDÍTÁS:

    Átmeneti megoldásként, amíg a KORG nem adja hozzá az Audiobust az egyes alkalmazásaik weboldalaihoz (amit talán a dolgok titokban tartása miatt felejtettek el eddig megtenni):

    1. Indítsd el az Audiobus alkalmazást elsőként.
    2. Ezt követően indítsd el az egyes alkalmazásokat.

    Ennyi az egész. Ettől kezdve az alkalmazások mindaddig láthatóak lesznek az Audiobuson belül, amíg ki nem kapcsolod az Audiobust. Ez a szükségmegoldás (nagy valószínűséggel) néhány nap múlva már nem lesz szükséges, mivel közösen dolgozunk a KORG-al, hogy sikeresen bekerüljenek alkalmazásaik az Audiobus adatbázisába.

  • Spanish:

    Como hacer aparecer las aplicaciones de Korg en Audiobus

    Esto es un apaño temporal hasta que añadan sus aplicaciones a la base de datos web de Audiobus (lo que probablemente han omitido para mantener la cosas un poco más en secreto)

    • Primero, abre Audiobus
    • Luego, abre todas sus aplicaciones

    Ya está. Desde ese momento, sus aplicaciones aparecerán en la lista de Audiobus hasta que la aplicación de Audiobus se cierre. Este apaño ya no será necesario (seguramente) dentro de unos días, ya que estamos trabajando con Korg para añadirlas a nuestra base de datos.

  • Spanish (not perfect but works):

    Español:

    Esta es una solución temporal hasta que KORG añada sus aplicaciones a la base de datos web de Audiobus (probablemente se omitieron para mantener las cosas un poco más en secreto)

        Ejecutar Audiobus primero.
        Entonces, ejecutar las aplicaciones de KORG.
    

    Ya está. A partir de ese momento, las aplicaciones estarán siempre listadas dentro de Audiobus hasta que la aplicación se cierre. Esta solución temporal será (seguramente) innecesaria en los próximos días, a medida que trabajemos junto con KORG para añadirlos a nuestra base de datos.

  • (BTW, use carlespal version, I think it is better ;-) )

  • Thanks guys!

  • Could it be that they probably did add them to the database? Because I could find them normally via Audiobus, didnt need the workaround. Needless to say this is an absolute beauty to have ielectribe sync perfectly with play and stop to Loopy.

    This is indeed a revolution through evolution. Thanks Sebastian and Michael. The wait was worth it all the way.

  • They show up for me too without needing the workaround.

  • Yep, we did a thing.

  • Český překlad:

    Jedná se o dočasné řešení, dokud chcete přidat své KORG aplikace do Audiobus webové databáze (které jsou pravděpodobně vynechány, aby to bylo tajemství):

    Spusťte Audiobus první.
    Pak otevřete všechny KORG aplikace.
    To je všechno. Od té doby, budete mít jejich aplikace vždy uvedeny v Audiobus dokud app Audiobus znovu nevypnete. Toto řešení bude (s největší pravděpodobností) vyřešeno v příštích několika dnech, jak budeme spolupracovat s KORG pro přidání do naší databáze.

  • This issue has now been resolved. Thanks everyone!

This discussion has been closed.